For screen reader problems with this website, please call239-597-90772 3 9 5 9 7 9 0 7 7Standard carrier rates apply to texts.
Executive Electronics of Southwest Florida Inc
239-597-9077
The AT-UHD-EX-100CE-TX is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.
Product Weight (lbs.) | 0.86 |
---|---|
Manufacturer Warranty | 10 Year |
Firmware | Mini-B USB |
---|---|
HDBaseT | RJ45 (8P8C) |
HDMI | Type A |
LAN | RJ45 (8P8C), Ethernet pass through |
TX-IR | 4-pin captive screw |
RS-232 | 3-pin captive screw |
Power | 2-pin, 48V captive screw |
Consumption | 12W (when paired with RX) |
Supply | Input: AC100~240V 50/60Hz; Output: DC 48V/0.83A |
H x W x D | 0.98 x 4.29 x 3.50 (inch) |
H x W x D w/Ears | 1.06 x 4.69 x 3.50 (inch) |
Weight | 0.86lbs |
The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.
This HDBaseT Class A transmitter is designed to support the growing number of displays and video projectors in the commercial market with HDBaseT inputs. Built-in Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher to the display or remote input device. Installer-friendly features include: a rack-mountable form factor that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.
The AT-UHD-EX-100CE-TX is compatible with the AT-UHD-EX-100CE-RX receiver, as well as Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This transmitter is also ideal for extending AV and control to displays with HDBaseT inputs.
Compatible with Ultra High Definition sources and displays
Full support of 4K/UHD streaming services and playback devices
Adheres to latest specification for High-bandwidth Digital Content Protection
Allows protected content stream to pass between devices
Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Uses external power supply (included)
Eliminates the need for remote power or power-injection devices
Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable
Eliminates multiple cable runs between source, control system, router, and display
Transmits HDMI signals up to 330 ft (100m) @ 1080P and 328 ft (100m) @ 4K/UHD using CAT6a/7 cable
Uses easy to integrate category cable for low-cost, reliable system installation
Placement of ports on rear panel simplifies wire management
Saves installation time and eliminates clutter
Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™
Allows any multi-channel audio stream to be used within a professional audio system
Front panel USB port provides an easy means for kit upgrades
Ensures long term system return on investment
LED indicators provide power and HDBaseT link status information
Provides easy setup and troubleshooting
Included power supply provides ample power for up to three Atlona HDBaseT extenders
Four Atlona HDBaseT extenders can be powered using the optional AT-PS-483125-C power supply
Reduces clutter from multiple power supplies in equipment racks
Easy installation into racks and confined spaces behind displays
Keeps devices out-of-sight when placed in public spaces
User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets
Ensures long-term product reliability and performance in residential and commercial systems
Specify, purchase, and install with confidence
Firmware | Mini-B USB |
HDBaseT | RJ45 (8P8C) |
HDMI | Type A |
LAN | RJ45 (8P8C), Ethernet pass through |
TX-IR | 4-pin captive screw |
RS-232 | 3-pin captive screw |
Power | 2-pin, 48V captive screw |
Consumption | 12W (when paired with RX) |
Supply | Input: AC100~240V 50/60Hz; Output: DC 48V/0.83A |
H x W x D | 0.98 x 4.29 x 3.50 (inch) |
H x W x D w/Ears | 1.06 x 4.69 x 3.50 (inch) |
Weight | 0.86lbs |
Product Weight (lbs.) | 0.86 |
Manufacturer Warranty | 10 Year |